Float Switches
Body:Â ABS plastic / white epoxy
Float:Â Polypropylene
Wire 21 AWG:
Max voltage: 48V (AC or DC)
Max current:Â 0.5A
Specifications:
- Cable Length: 37.5cm
- Max Breakdown Voltage: 220V DC
- Max Switching Voltage: 100V DC
- Maximum Switching Current: 0.5 A
- Max Load Current: 1.0 A
- Max Contact Resistance: 100 mΩ
- Temp Rating: -10~+85°C
- Installation: top or bottom mounted vertically
- Use medium: water, oil, chemical medium
- Pressure range: 0.2MPa
Based on 0 reviews
Only logged in customers who have purchased this product may leave a review.
Related products
-
Gas Sensors, Robot Parts and Kits
MQ2 Sensor Module
- MQ-2 Modul is a device that is used for sensing and measuring the concentration of gases in the air. It can detect such gases as: LPG, propane, methane, hydrogen, alcohol, smoke and carbon monoxide.
- It can measure a gas concentration from 100 to 10000ppm and is ideal for detecting a gas leak, as a gas alarm or for other robotics and micro-controller projects.
- The MQ series sensors use a small heating element with an electronic-chemical sensor. They are sensitive to various gases and are suitable for indoor use.
- The sensor has a high sensitivity and fast response time, but needs a few minutes to give accurate readings because the sensor needs to heat up first.
- The measured values of the sensor are output as analogue values, which can be easily evaluated with a micro-controller.
- This sensor is ready for connection to a micro-controller, such as an Arduino board. For use with a Raspberry Pi an additional AD converter is required.
- The module has a potentiometer for setting the threshold value. At the digital pin, the sensor outputs only a 0 or 1, depending on whether the set threshold value is exceeded.
SKU: 2023082503
There are no reviews yet.